TDK’s ICP-20100 is the Lowest Power Barometric Pressure Sen-sor to Achieve NextNav Certification

  • The ICP-20100 ultra-low noise pressure sensor is now in mass production, available from distributors worldwide that carry InvenSense products
  • Perfect fit for 3D location services with its ability to accurately measure a
    height difference as small as 5cm
  • Suitable for smartphones, tablets, drones, AR/VR, and smart home appliances

TDK Corporation (TSE:6762) announces that the InvenSense ICP-20100, the latest generation of the SmartPressure™ MEMS Barometric Pressure Sensors, is now in mass production and has been certified by NextNav. Launched in 2021, the NextNav Certified process independently verifies the InvenSense sensor accuracy measurements, by engaging directly with component manufacturers to rigorously test sensors in real world operating scenarios. NextNav Certified supports these manufacturers in measuring performance against higher standards, ultimately benefiting wireless phones, wearables, and other devices, providing strong performance assurance for hardware manufacturers utilizing the certified components. The ICP-20100 is the lowest power barometric pressure sensor to receive this certification.

ICP-20100 can operate over wide temperature ranges and deliver measurement accuracies required by a variety of applications including 3D geolocation and emergency location service (E911), mobile indoor/outdoor navigation, sport and fitness activity tracking, and altitude-hold in drones. The sensor enables extended battery life for always-on applications due to its extreme low-power consumption.

“TDK’s first-generation barometric pressure sensor, ICP-10111, was the first to achieve NextNav certified status last year. ICP-20100, our second-generation barometric pressure sensor brings architectural innovation to deliver even higher accuracy at lower power,” said Uday Mudoi, Senior Director of Product Marketing at InvenSense, a TDK Group Company. “The NextNav certification of ICP-20100 assures our customers that TDK’s performance sensing solution will continue to enable smarter systems that deliver the best user experience.”

“Pressure sensor performance is critical to delivering accurate 3D location service for applications such as E911,” said Dan Hight, VP of Business Development and Partnerships at NextNav. “NextNav certification of InvenSense ICP-20100 demonstrates that the sensor performance clears a high bar and offers a solid choice to customers.”

The InvenSense SmartPressure™ Sensors use an innovative capacitive MEMS architecture to deliver industry-leading accuracy, long term drift, temperature stability, and low power consumption.

The ICP-20100 device combines a barometric pressure and a temperature sensor in a small 2.0 mm x 2.0 mm x 0.8 mm package. The device enables flexible user designs with multiple input voltage levels including 1.2V, 1.8V, and 3.3V, and a choice of I²C, I3CSM, and SPI interfaces. The ICP-20100 can be configured to achieve ultra-low noise or ultra-low power performance and has the versatility to perform anywhere in-between those thresholds. With ultra-low noise pressure sensing capabilities, the ICP-20100 can detect altitude changes of less than 5 cm.

A comprehensive development kit, DK-20100, and evaluation platform, EV_ICP-20100, are also available along with necessary software to enable quick-to-market development of customer systems. In addition to the ICP-20100, the ICP-10125, ICP-10101, and ICP-10111 pressure sensors are part of the SmartPressure™ Sensor family and are available from distributors worldwide that carry InvenSense products.

TDK will be demonstrating SmartPressure™ products along with the industry’s most comprehensive portfolio of passive components, sensors, power supplies, and batteries at booth #718 at Sensor Converge, June 27-29 in San Jose, CA. To learn more, please visit https://invensense.tdk.com/….

Glossary

  • IoT: Internet of Things
  • Pa: Pascal
  • E911: Enhanced 911 service
  • DK: Developer Kit
  • MEMS: Micro-Electro-Mechanical Systems

Main applications

  • Smartphones, tablets, E911
  • Leisure, sports, and fitness activity monitoring for wearable sensors
  • Altitude Control of Drones and Flying Toys
  • Virtual Reality and Gaming Equipment
  • Altimeters and barometers for portable devices
  • Indoor/outdoor navigation (dead-reckoning, floor/elevator/step detection)
  • Smart home appliances such as robotic vacuum cleaners

Main features and benefits

  • Pressure operating range: 30 to 110 kPa
  • Pressure sensor temperature coefficient offset: ±0.5 Pa/°C
  • I²C, I3CSM, and SPI interface
  • FIFO, Interrupt, User configurable ODR/OSR
  • RoHS and Green compliant

Availability and Pricing

For more information availability and pricing please visit

email: sales.europe@macnica.com.

About TDK Corporation

TDK Corporation is a world leader in electronic solutions for the smart society based in Tokyo, Japan. Built on a foundation of material sciences mastery, TDK welcomes societal transformation by resolutely remaining at the forefront of technological evolution and deliberately “Attracting Tomorrow.” It was established in 1935 to commercialize ferrite, a key material in electronic and magnetic products. TDK‘s comprehensive, innovation-driven portfolio features passive components such as ceramic, aluminum electrolytic and film capacitors, as well as magnetics, high-frequency, and piezo and protection devices. The product spectrum also includes sensors and sensor systems such as temperature and pressure, magnetic, and MEMS sensors. In addition, TDK provides power supplies and energy devices, magnetic heads and more. These products are marketed under the product brands TDK, EPCOS, InvenSense, Micronas, Tronics and TDK-Lambda. TDK focuses on demanding markets in automotive, industrial and consumer electronics, and information and communication technology. The company has a network of design and manufacturing locations and sales offices in Asia, Europe, and in North and South America. In fiscal 2022, TDK posted total sales of USD 15.6 billion and employed about 117,000 people worldwide.

About InvenSense

InvenSense, a TDK Group company, is a world-leading provider of SmartSensing platforms. InvenSense’s vision of Sensing Everything® targets the consumer electronics and industrial areas with integrated Motion, Sound, Pressure, and Ultrasonic solutions. InvenSense’s solutions combine MEMS (micro electrical mechanical systems) sensors, such as accelerometers, gyroscopes, compasses, microphones, barometric pressure sensors, and ultrasonic time-of-flight sensors with proprietary algorithms and firmware that intelligently process, synthesize, and calibrate the output of sensors, maximizing performance and accuracy. InvenSense’s motion tracking, ultrasonic, audio, fingerprint, location platforms and services can be found in Mobile, Wearables, Smart Home, Industrial, Automotive, IoT, Robotics, and many more types of products. InvenSense became part of the MEMS Sensors Business Group within the Sensor Systems Business Company of TDK Corporation in 2017. In April of 2022, Chirp Microsystems formally merged with InvenSense. InvenSense is headquartered in San Jose, California and has offices worldwide.

For more information, please visit https://www.invensense.tdk.com.

About NextNav

NextNav Inc. (Nasdaq: NN) is a leader in next generation GPS, enabling a whole new ecosystem of applications and services that rely upon vertical location and resilient geolocation technology. The company’s Pinnacle network delivers highly accurate vertical positioning to transform location services, reflecting the 3D world around us and supporting innovative, new capabilities. NextNav’s TerraPoiNT network delivers accurate, reliable, and resilient 3D positioning, navigation and timing (PNT) services to support critical infrastructure and other GPS-reliant systems in the absence or failure of GPS.

About Macnica ATD Europe S.A.S.

Founded in 1990 as ATD Electronique, Macnica ATD Europe headquarter offers innovative components dedicated to imaging applications for the European market. Its product portfolio includes: image sensors (CCD, CMOS, InGaAs, Thermal etc.), optics, interface circuits, FPGA & IPs, imaging processors, cables and OLED microdisplays.

It also covers development tools and design services enabling fast and efficient realization of new high-performance camera systems for markets such as machine vision, medical, life sciences, surveillance, automotive and others. After the acquisition of the company by Macnica Inc. as of October 1, 2020 the company operates under the name Macnica ATD Europe.

About Macnica, Inc.

Macnica was established in 1972 as a semiconductor distribution company headquartered in Yokohama, Japan, and has over 85 sales offices worldwide in eastern Asia, Europe and the USA. Total number of employees is over 3,000 and its consolidated revenue for fiscal 2020 was approximately US$ 5.5 B.

Macnica is famous for having an excellent engineering team of more than 900 application support engineers, IC designers and software developers with strong focus on providing technical support for its customers including custom design services. Macnica is continuing to extend its presence globally by having successful partners in strategic areas in the electronics market.

Über die Macnica ATD Europe GmbH

Macnica’s ATD Europe GmbH, (former Macnica GmbH), was originally established in the UK in 2006, and moved to Germany in July 2008, to increase efficacy of its service for European customers.

By it’s acquisition of the Munich based company Scantec Mikroelektronik in 2014 Macnica Europe formed a powerful semiconductor distribution with headquarter in Ingolstadt and offices in Munich, Regensburg, Milton Keynes (UK) and Warsaw offering an attractive and competitive portfolio of highly sophisticated devices.

Macnica provides end to end support from design-in to production through its global service network to its customers, regardless of the final destination of the product shipment to customers‘ manufacturing locations.

Firmenkontakt und Herausgeber der Meldung:

Macnica ATD Europe GmbH
Nürnberger Str. 34
85055 Ingolstadt
Telefon: +49 (841) 88198-0
Telefax: +49 (841) 88198199
http://www.macnica.eu/de

Ansprechpartner:
Josef Sigl
Marketing
Telefon: +49 (89) 899143-15
Fax: +49 (89) 899143-17
E-Mail: josef.sigl@macnica.com
Sales
Telefon: +49 (841) 88198-102
E-Mail: sales.europe@macnica.com
Für die oben stehende Pressemitteilung ist allein der jeweils angegebene Herausgeber (siehe Firmenkontakt oben) verantwortlich. Dieser ist in der Regel auch Urheber des Pressetextes, sowie der angehängten Bild-, Ton-, Video-, Medien- und Informationsmaterialien. Die United News Network GmbH übernimmt keine Haftung für die Korrektheit oder Vollständigkeit der dargestellten Meldung. Auch bei Übertragungsfehlern oder anderen Störungen haftet sie nur im Fall von Vorsatz oder grober Fahrlässigkeit. Die Nutzung von hier archivierten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber. Eine systematische Speicherung dieser Daten sowie die Verwendung auch von Teilen dieses Datenbankwerks sind nur mit schriftlicher Genehmigung durch die United News Network GmbH gestattet.

counterpixel